puritan magnetics, inc. - magnetic separators/magnetic separation equipment/separation and material handling equipment, magnetic separators

puritan magnetics, inc. - magnetic separators/magnetic separation equipment/separation and material handling equipment, magnetic separators

Magnetic separators for capturing, controlling and removing ferrous tramp metal contaminants from products and processing systems. These magnetic separators will ensure product purity and protect processing equipment form tramp metal damage.

Magnetic Separation/Protection equipment is used to remove ferrous tramp metal contaminants from dry particulate, liquids, and slurries in the process of grain, feed, sugar, cereal, chemical, mineral, plastics, oil, textile, salt, pharmaceuticals, and recycled products, to name a few. A partial list of Separation Equipment would include magnetic plates, grates, drawers, drums, humps, pulleys, spouts, and belts. These magnetic separators will ensure product purity and protect processing equipment from tramp metal damage.

Material Handling industrial magnetic equipment includes conveyors, conveying rail, fanners, sweepers, hand tools, holding and fixturing, lifting, and many other magnetic designs. Material Handling products can improve employee safety and automate existing systems. Special designs, and engineering assistance are always available for difficult applications.

Powerful opposing magnets uniquely mounted to the outside of the housing inlet helps direct product towards the magnets for outstanding performance in all grain and feed industry applications. Unlike other vertical spout magnets, these magnets retract from the housing for cleaning, taking the tramp metal out of the product flow area, so there is less of a chance for tramp metal returning to the process system.

wet high intensity magnetic separator, dry drum magnetic separator, magnetic separator suppliers - longi magnet co., ltd

wet high intensity magnetic separator, dry drum magnetic separator, magnetic separator suppliers - longi magnet co., ltd

Thailand has plenty of river sand resource which is high quality of silica sand, upto 99.6% SiO2. In the northest, the river sand had been proved that the high iron contaimination Fe2O3 upto 0.165% can be lowered down to 0.065% by high gradient magnetic separation technology.

Recycling aluminum refers to the scrap aluminum as the main raw material to obtain aluminum alloy after pretreatment, smelting, refining, and ingot casting. Aluminum has features of strong corrosion resistance, low loss during use, and will not lose its basic characteristics after repeated recycling for many times, and has extremely high recycling value.

Wet magnetic separation is widely used in the purification of quartz sand, which has the characteristics of significant iron removal effect, large handling capacity and no dust pollution. In the primary stage of quartz sand purification, wet magnetic separation is generally considered to be an excellent way of iron removal purification, but in the stage of high-purity quartz cleaning, the conventional wet magnetic separation purification effect is not obvious, the reasons can be summarized as three points.

LONGi magentic separator bring hot sales, recently,RCBD flame-proof electromagnetic separator in addition with excellent iron removel performance, excellent heat dissipation efficiency and perfect service guarantee ability successfully won the bid for the domestic leading coal enterprises, a total of 39 sets, lay a good foundation for the market follow-up development.

magnetic separation equipment | bunting

magnetic separation equipment | bunting

BuntingMagnetic Separation Equipment is used in the food, dairy, grain & milling, chemical, plastics, oil, textile, recycling, and other industries for applications and products similar to yours. With our products, you have a single source of supply for everything you need for efficient separation. You can rely on our equipment and expertise to eliminate product contamination and damage to machinery from tramp metal in an economical and cost-effective way. Your equipment can be ordered to meet specific construction standards and customized to satisfy your special requirements.

Our sanitary-grade metal separators are the first separators to earn USDA, AMS-Acceptance. Our engineers refined existing designs to help processors meet increased marketplace demands and governmental requirements for safer and purer foodstuffs, meats, pharmaceuticals, and chemicals. All of these approved models have met or exceeded the USDA, AMS criteria as published in the NSF/ANSI/3-A 14159-1 2002 specifications, passed inspection, and earned the right to bear the USDA, AMS Meat and Poultry Accepted Equipment logo.

Metal-Detectable Gaskets and Grommets add another layer of safety in our food-grade (or higher) Magnetic Separation equipment including HF Drawer Filters, Magnetic Liquid Traps, In-Line Magnets, Hump Magnets. Your increased demands for product safety are met even more with this industry-leading feature. With Metal-Detectable Gaskets and Grommets, if a piece chips off or the gasket breaks, it is immediately caught by the equipments magnetic cartridge or plate. The broken piece can also be seen in any metal detection or x-ray system.

The CR-MLT offers high separation capabilities combined with exceptional resistance to corrosion, providing a solution for customers in a wide range of industries who are handling corrosive and acidic materials.

The CR-MLT offers high separation capabilities combined with exceptional resistance to corrosion, providing a solution for customers in a wide range of industries who are handling corrosive and acidic materials.

FF Series Drawer Magnets are built with strong Rare Earth magnets for strong holding force ingravity flow applications. They are temperature compensated with stainless steel construction and designed for the Plastics Industry.

FF Series Drawer Magnets are built with strong Rare Earth magnets for strong holding force ingravity flow applications. They are temperature compensated with stainless steel construction and designed for the Plastics Industry.

HF Drawer Magnets are for gravity flow applications. They house two or more magnetic cartridges for efficient product separation. For all industries - Food, Grain and Milling, Powder and Bulk, Recycling, and Plastics.

HF Drawer Magnets are for gravity flow applications. They house two or more magnetic cartridges for efficient product separation. For all industries - Food, Grain and Milling, Powder and Bulk, Recycling, and Plastics.

Magnetic Liquid Traps remove ferrous tramp including 400 series stainless steel and work-hardened stainless steel from liquid processing and conveying lines. Comes in several styles of traps with High-energy, temperature compensated Neodymium Magnets. Metal Detectable gaskets are standard. For the Food and Powder and Bulk Industries.

Magnetic Liquid Traps remove ferrous tramp including 400 series stainless steel and work-hardened stainless steel from liquid processing and conveying lines. Comes in several styles of traps with High-energy, temperature compensated Neodymium Magnets. Metal Detectable gaskets are standard. For the Food and Powder and Bulk Industries.

Plate Magnets capture fine metal particles from chutes, suspended in powdery, moist, clumpy, abrasive or bulk materials. Various models available. For all industries including, Food, Powder & Bulk, Grain & Milling, Recycling and Plastics.

Plate Magnets capture fine metal particles from chutes, suspended in powdery, moist, clumpy, abrasive or bulk materials. Various models available. For all industries including, Food, Powder & Bulk, Grain & Milling, Recycling and Plastics.

eriez magnetic separation

eriez magnetic separation

Eriez Permanent Magnetic Separators require no electric power. With proper care, they can last a lifetime with very little loss of magnetic field strength. Eriez permanent magnets are supplied for a wide range of applications including dry bulk materials, liquids or slurries and even high temperature applications. Select Eriez Permanent Magnetic Separators are available with the Xtreme RE7 Magnetic Circuit - the industry's strongest magnet!

Eriez Permanent Magnetic Separators require no electric power. With proper care, they can last a lifetime with very little loss of magnetic field strength. Eriez permanent magnets are supplied for a wide range of applications including dry bulk materials, liquids or slurries and even high temperature applications.

Electromagnetic Separators use wire coils and direct current to provide a magnetic field which can be used to separate ferrous material from non ferrous products. Electromagnetic separators offer greater flexibility and strength as well as different magnetic fields for specific applications.

mpi | industrial magnets, separators, detectors, and conveyors

mpi | industrial magnets, separators, detectors, and conveyors

MPI specializes in magnetic separation equipment. Our equipment removes ferrous contaminants from dry or liquid product flows. Our standard magnetic separators include gravity, pneumatic, liquid, and magnetic filtration equipment. Learn More

Magnetic belt conveyor systems will increase your production and profitability. They help you control your metal. Electric Scrap Shaker Conveyors, Magnetic Conveyors, Steel Hinge Belt Conveyor, and Vibratory Feeder. Learn More

MPI offers a large selection of Metal Sorting Systems. Pick from our Separation Roll, Drum Separator, Suspended Magnets, Eddy Current, Commingled Sorting, Detection Sorting, and Magnetic Belt Feeder. Learn More

MPIs electronic inspection equipment utilizes the most advanced electronic and mechanical technologies. Metal Detectors, X-Ray Equipment, and Checkweighers contaminants in your food or industrial processes.Learn More

Put MPI magnets to work for you to move and hold your metal in your manufacturing. Lifting Magnets, Magnetic Chucks, and Sheet Separators are available. Some items are available for order at Amazon.com.Learn More

We have a full line of Pull Test Kits, Gauss Meters, Metal Detector Test Sticks, Safe Inserts, and Replacement Parts. Some are available through Amazon.com. Items are in stock for prompt shipment.Learn More

MPI specializes in magnetic separation equipment. Our equipment removes ferrous and non-ferrous contaminants from dry or liquid product flows. Our standard magnetic separators include gravity, pneumatic, liquid, and magnetic filtration equipment. Learn More

Magnetic belt conveyor systems will increase your production and profitability. They help you control your metal. Electric Scrap Shaker Conveyors, Magnetic Conveyors, Steel Hinge Belt Conveyor, and Vibratory Feeder. Learn More

MPI offers a large selection of Metal Sorting Systems. Pick from our Separation Roll, Drum Separator, Suspended Magnets, Eddy Current, Commingled Sorting, Detection Sorting, and Magnetic Belt Feeder. Learn More

MPIs electronic inspection equipment utilizes the most advanced electronic and mechanical technologies. Metal Detectors, X-Ray Equipment, and Checkweighers contaminants in your food or industrial processes.Learn More

Put MPI magnets to work for you to move and hold your metal in your manufacturing. Lifting Magnets, Magnetic Chucks, and Sheet Separators are available. Some items are available for order at Amazon.com.Learn More

We have a full line of Pull Test Kits, Gauss Meters, Metal Detector Test Sticks, Safe Inserts, and Replacement Parts. Some are available through Amazon.com. Items are in stock for prompt shipment.Learn More

MPI is grateful to our employees who chose the skilled trades path career and contribute to our success as the leading manufacturer of metal control solutions. #NationalSkilledTradesDay #MPImagnet #americanmade

MPI is designated as a Critical Infrastructure Supplier and will remain operational during our current health care situation. We value our employees and are taking the necessary precautions to ensure a healthy work environment. MPI will continue to produce magnetic separation, electronic inspection and material handling equipment vital to the industrial, food and healthcare industries. We can be reached by email [email protected] or phone 248.887.56001.

magnetic metal separators - magnetix

magnetic metal separators - magnetix

MAGNETIC SEPARATORS a wide range of MAGNETIX products, designed for metal separation in applications such as: mining, power industry, recycling andfood industry. The magnetic separators are installed on belt conveyors, chutes and pneumatic conveying pipelines.

Magnetic and electromagnetic separators MAGNETIX are products with the best European quality. We can get it because all steps of manufacturing of metal separators from designing, testing and production are in our factory. For building of metal separators we are using the strongest neodymium and ferrite magnets and the best quality parts from our European suppliers. The best quality is signed by ISO certificate TV NORD.

In the offer the Customer can find typical magnetic separators for typical sizes of conveyors, pipelines and chutes. MAGNETIX as a producer realizing also not typical projects where is designing of different sizes and types of magnetic separators for many industrial installations. Special metal separators can be using in explosive zones ATEX like coal mines and power plants, mils, sugar factories etc. with high explosive dustiness.

CloseUsing the website (www.magnetix.com.pl) means acceptance of the terms contained in the privacy policy. In particular, this applies to the acceptance of the processing and storage of personal data collected through this Site and used for marketing and commercial purposes. This website uses cookies collected for statistical purposes and used for the proper operation of the website. Conditions for storage or access cookies, you can change your browser settings - failure to change the browser settings, you consent to the saving.

belt magnetic separator | conveyor belt magnet

belt magnetic separator | conveyor belt magnet

The Cross Belt Separator is a suspended magnet with a continuously running belt that strips off captured tramp metal and discharges off the side or end of the conveyor. The permanent magnetic forces provide continuous and effective removal of unwanted tramp metal. Permanent magnet will retain tramp metal even during power outages and fluctuations.

Innovative Magnetic Technologies Inc. designed and manufactured Cross Belt Separators to provide industry with a reliable and extremely effective means of tramp metal extraction. The core of the Cross Belt Separator is IMTs most powerful suspended plate magnet. The CBS is manufactured with a heavy duty frame, vulcanized rubber cleated belt and off the shelf components. The shaft mounted helical worm gear motor is available in various voltages for simple hook up installation.

Cross Belt Separators are used in the magnetic separation of ferrous materials from products to ensure a safe, metal free output. These powerful magnets are usually installed above conveyor belts, and draw the unwanted metals upwards and away from the conveyor belt to allow for uncontaminated production.

Suspended Plate Magnets are useful across many industries for extracting ferrous contaminants from production lines. Suspended plate magnets offer exceptional efficiency since they require no energy consumption and as such, will not fail in the case of power fluctuations or shut off. IMTs powerful magnets are typically installed either directly above a conveyor belt line or suspended over the conveyor head pulley at the discharge point.

Cross Belt Separators are used in the magnetic separation of ferrous materials from products to ensure a safe, metal free output. These powerful magnets are usually installed above conveyor belts, and draw the unwanted metals upwards and away from the conveyor belt to allow for uncontaminated production.

Custom design, fabrication and assembly involves multiple processes; it is critical to have well-documented quality control procedures. IMT operates an in-house quality assurance program following materials and components from receipt of delivery through fabrication to final product ensuring the highest quality standards are met.

overband magnetic separators | goudsmit magnetics

overband magnetic separators | goudsmit magnetics

For installation above conveyor belts in the bulk transshipment or recycling industries. Overband magnetic separators - also called conveyor belt magnets or magnetic separator conveyor belts - remove ferrous particles from raw materials and carry them away automatically and continuously.A reliable and effective method for separating large amounts of iron.

An overband magnet effectively and quickly separates high volumes of iron or steel and hangs above a flat or trough-shaped conveyor belt - in line or cross belt magnet. An overband magnetic separatorisself-cleaning and continuously draws ferro parts from a material flow.

Cost effective solution. Suitable for thin to thick layers and do not require a control box. Very reliable and available in many belt widths. Available in transverse or in-line versions for installation above your conveyor belt or end pulley.

Heavy, robust and very powerful. Electromagnetic overband magnets have a deeply penetrating magnetic field and are therefore suitable for very thick layers. A control box is required. The magnet can be turned off for service or cleaning purposes.

We have recently developed a permanent overband magnet with a strong, deeply penetrating magnetic field. The magnet attracts a standardised steel bar (VDE 0580) of 20x120mm at a distance of 550mm; something that was previously only possible...

We have recently developed a permanent overband magnet with a strong, deeply penetrating magnetic field. The magnet attracts a standardised steel bar (VDE 0580) of 20x120mm at a distance of 550mm; something that was previously only possible...

Goudsmit Magnetics has developed a permanent, lightweight neodymium overbelt magnet based on a new design. This was done at the request of our customer Kok Lexmond which is active in the rubble processing recycling industry. The request was to make the rubble ...

Goudsmit Magnetics has developed a permanent, lightweight neodymium overbelt magnet based on a new design. This was done at the request of our customer Kok Lexmond which is active in the rubble processing recycling industry. The request was to make the rubble ...

Our Product Manager Magnetic Recycling Systems Leander van der Palen has noticed an increase in demand for Neodymium overbelt magnets for installation above mobile shredders. What is driving this trend? Leander explains: The market for mobile shredders...

Our Product Manager Magnetic Recycling Systems Leander van der Palen has noticed an increase in demand for Neodymium overbelt magnets for installation above mobile shredders. What is driving this trend? Leander explains: The market for mobile shredders...

crossbelt overhead magnets

crossbelt overhead magnets

Crossbelt or belt magnets, also known asoverhead magnetic separators, offer a practical and efficient method for separating ferrous metal from fast-moving materials on conveyors. Our belt magnets utilize Tri-Polar Magnetic Circuitry, exclusive to the industry!

PCB Our PCB Series of Belt Magnets are the #1 Self-Cleaning Magnets sold in North America. The PCB magnets are standard on portable and stationary crushing, shredding, grinding, screening and recycling plants, with thousands in operation throughout the world. Recycling operations include MRFs, C & D, crushed concrete/asphalt, scrap wood, crushed glass, scrap tires and other solid waste applications. These are just some of the uses for these magnets, they are operating in many other industries with great success.

The Self-Cleaning Recycling Magnetsare Permanent Magnets using the latest and highest grade of materials suitable for this type of magnet system. When compared to electro magnets, no electrical source is required for the magnet, it is considerably lighter in weight, has a lower profile, is virtually maintenance free and less expensive to purchase, install and operate. In most applications the Type K have many advantages over an electro magnet. Our crossbelt magnets are available with both electric or hydraulic drives for the belt system.

Earlier solutions to tramp iron and ferrous metal separation, be it rebar, wire, screening, drill steel, loader teeth, sledgehammers, nails, tin cans etc, from the material being processed has been to utilize belt-pickers or metal detectors. While both are expensive alternatives to our Self-Cleaning Magnets, the metal detector will also continuously shut down the process if too much ferrous is present.

Companies that use our Self-Cleaning Magnetic Separators have reported back that they have recovered the original cost in as little as two months due to reduction in manpower expense, minimal production stoppages, higher percentage of reclaimed scrap and upgraded, higher quality end product.

The magnet block enclosed in this system is powerful, computer designed, and mounted in a heavy-duty steel frame. The magnet is traversed with a heavy-duty vulcanized cleated belt running on two crowned pulleys and driven by either an electric or hydraulic motor, depending on the application. The entire system is designed for durability and is able to operate in the harshest environments. Stainless steel magnet and belt guards on both sides of the magnet are standard and run the full length for safety of workers and protection of the system.

These overhead magnet systems are normally suspended by their eyebolts, over the conveyor at a specific distance, called the working gap the distance from the magnet face to the bottom of the processed material. Normally suspended from a goal post, A-frame or 4-poster type steel structure, they are available for both crossbelt (perpendicular to the conveyor processing the material) and in-line applications (same direction as the conveyor and over the head pulley). As tramp ferrous metals pass underneath the magnet and become attracted to the face of the magnet, the cleated belt moves the metals clear of the conveyor burden transporting it out of the magnetic field, discharging it away from the conveyor.

Exclusive to the industry, our magnetic separators utilize tri-polar magnetic circuitry. This eliminates most peripheral magnetic leakage and directs the magnetic field straight down, improving and increasing the strength compared to equivalent sized magnets. This technology is not available from any other magnet system manufacturer in North America. Magnetic intensity in excess of 400-500 gauss at the recommended working gap retained permanently when used under normal operating conditions.

If buying American made products is important to you, always ask where competing items are made. The majority of our competitors' products originate in Canada or overseas, a fact not always clearly stated.

industrial magnets: overhead magnetic separators & conveyor magnets

industrial magnets: overhead magnetic separators & conveyor magnets

Shields magnetic separators and belt magnets serve as an insurance policy in industrial applications ranging from food and aggregate processing to coal mining and plastics production and recycling. Our separation equipment removes damaging ferrous metal from raw and finished materials throughout all stages of production including conveyor belts, grain hoppers and flow systems.

Adding overhead separators, drum magnets or crossbelt magnets can save your organization thousands of dollars in lost product and materials, damage to your production equipment and help improve up-time. All of our magnetic separators use powerful Grade 8 permanent magnets and can be ordered to spec, including electromagnets. Well work with your to customize a separation system that will fit your facility and application perfectly.

Utilizing state-of-the-art technology and the most advanced materials available, Shields magnetic sweepers are innovative, functional, and effective. Our entire line of sweepers carries a lifetime guarantee on strength and a full product performance guarantee. All of our industrial magnets originate in the USA.

Our Type CM-3 is designed to remove larger ferrous metal such as bucket teeth, drill bits, and rebar from high-volume industrial flow. Capable of living items up to four inches below the unit, the Type CM-3 Super Strength Conveyor Magnet is a no-maintenance item and carries a lifetime guarantee on magnetic strength.

The Type CM-1 Conveyor Magnet is a versatile, portable and extremely effective way to remove random ferrous metal during product processing. Idea as back-up Insurance Policy when used in conjunction with a larger crossbelt magnet to retrieve small fines which get past the crossbelt, or as a stand-alone for light to medium volume industrial flow.

Permanent Suspension Magnets are designed specifically for the extraction of occasional tramp iron from material being processed on the conveyor belt, vibratory feeder or gravity chute. These overhead magnets are constructed using Grade 8 high power ceramic magnets and require no electricity, unlike electro type units.

Crossbelt or belt magnets, also known as overhead magnetic separators, offer a practical and efficient method for separating ferrous metal from fast-moving materials on conveyors. Our belt magnets utilize Tri-Polar Magnetic Circuitry, exclusive to the industry.

Our head pulleys and drum magnets provide continuous protection against tramp iron contamination of both large and fine metal particles. We offer magnet sizes for every application, as small as 4 diameter. Our magnetic pulleys are available in regular strength and a high power version for more extreme applications.

A: We have over 40 sizes of belt magnets and stationary separators so first we have to determine what your application is. This is a very fast process and we can do it over the phone or you can fill out the on-line criteria sheet.

A: The stationary separators come equipped with sling chain for suspension, 4 turnbuckles for attaching and a swipe arm for easy cleaning. The Self-Cleaning Crossbelt Magnets are equipped with turnbuckles for mounting.

A: We do offer electro-magnets however unless your application is extreme, you do not need an electro, given todays technology a permanent magnet will do the job perfectly. We offer Tri-Polar Magnetic Circuitry in most units, which is exclusive to the industry. This eliminates peripheral leakage and directs magnetic field directly down to the conveyor.

A: We offer both self-cleaning and manually cleaned units. The self-cleaning units are called Crossbelt Magnets and have continuously running belts rotating around the magnet. The manually cleaned units are called Stationary Separators and these units are equipped with either slide trays for easy debris removal or swipe arms.

A: We have a one-size fits all unit, the Type CM-3 Conveyor Magnet, which is essentially a low cost insurance policy for lighter applications or to be used in conjunction with a larger unit or a magnetic head pulley. These can be purchased directly on the site or by calling us as well.

magnetic separator belt

magnetic separator belt

An electromagnet inside the machine attracts unwanted scrap metal from the material being conveyed; with the help of cleats, the unwanted metal is transported out of the magnetic field and discharged into a collection area.

Jagruti Rubber offers a variety of top cover qualities cleat/sidewalls magnetic separator belts: belts with hot-vulcanized rubber cleats, heavy duty rubber belts with stainless steel angle iron cleats/Brass cleats etc.. A various Cleat profile dimensions are available for specific applications.

Services :In addition to the supply of our products we provide services like Belts installation joining & maintenance, Rubber lining, Pulley Lagging at your site. We also take annual service contract.

Jagruti rubber offer a 24 hour, 7 days a week, 365 days a year emergency on site break down service. Using the latest equipment and well trained on-site personnel, Jagruti can offer an on-site service for all types of belts.

stationary overhead magnetic separators for conveyor belts

stationary overhead magnetic separators for conveyor belts

Permanent Suspension Magnetsare designed specifically for the extraction of occasional tramp iron from material being processed on the conveyor belt, vibratory feeder or gravity chute. These overhead magnets are constructed using Grade 8 high power ceramic magnetics and require no electricity, unlike electro type units.

The magnetic separator, usually a rectangular pattern, is suspended over the material being conveyed, while the ferrous material is extracted and held against the face of the magnet until manually cleaned off.

For safety and ease of cleaning, swipe arms or slide trays are standard on all magnetic separator units to assist in cleaning without having to touch the tramp metals. And when comparing to electro magnets, they are less expensive to purchase, operate and are virtually moisture, corrosion and flame proof.

Typical applications for the use ofPermanent Suspension Magnetsinclude removal of iron from coal, stone, fertilizers, recycled asphalt, stag, gypsum, ores and similar materials where contamination by tramp iron is occasional and continuous separation is not essential and the primary purpose is processing machinery protection. These overhead magnets can be mounted either horizontal or inclined over the head pulley. All stationary magnets are fitted with a set of adjustable suspension chains designed to suit application and attach to suspension lugs. Preferred installation position is above the head pulley where the burden is spread out and the material is in virtual suspension as it is discharged from the conveyor.

Magnetic Separators can be mounted on a variety of structures, including runway beams (using a trolley for suspension and movement) or A-Frame structure. Size availability covers the entire range of conveyor widths and material burden depths to 25, depending on material being separated.

WARRANTY A Limited Lifetime Warranty on the magnet system is offered, against loss of magnetic strength, when used under normal operating conditions. Magnet systems are available in over 110 models to match any conveyor width, from 12 to 84 or burden depth to 25, depending on the material being separated. With as many as 50 units always in stock at our warehouse, including many of the popular sizes, they are ready for immediate delivery.

Tri-Polar Magnetic Circuitryis relatively new on the magnet system scene. It is the ultimate in Permanent Magnet technology, not available from any other magnet system manufacturer. Shields Company/Mastermaghave developed this computer designed magnetic circuitry using their rare, large and very costly 13 Ton Magnetizer*, one of only four in the world. It is available as standard on SHIELDS/MASTERMAG PSM STATIONARY MAGNET SERIES in the larger sizes. *Magnet system manufacturers traditionally magnetize ceramic blocks before forming the circuit in a stainless steel box. Due to the nature of magnets wanting to repel each other there is a limitation on how many blocks can be stacked on top of each other. SHIELDS/MASTERMAG forms their circuit in the stainless steel box prior to magnetizing. After the circuit is completed and box sealed, it is immersed in the 15 Ton Magnetizer for three (3) separate sessions thoroughly magnetizing the system creating the Tri-Polar Magnetic Circuitry. The evolution of Permanent Magnets have taken some dramatic leaps in the past 15 plus years. First, is the quality of the material used to make a permanent magnetic system. In the case of SHIELDS/MASTERMAG, we use only Ceramic 8, as do most reputable magnet companies. This material, also known as Strontium Ferrite, has allowed permanent magnets to last longer (SHIELDS/MASTERMAG offers a Limited Lifetime Warranty against loss of magnetic strength see details below) and produce more field strength (gauss or force index).

In many applications, Permanent Industrial Magnets can be more or as effective as Electromagnets and have considerable advantages over Electros. Longer warranty Lower Profile Lighter No costly power required Less costly to purchase and operate

But with theTri-Polar Magnetic Circuitryas part ofSHIELDS/MASTERMAGslarger Permanent Industrial Magnet Series, Permanent Magnet Technology will never be the same. As a direct result of this new technology, peripheral magnetic leakage is all but eliminated, directing the magnetic field straight down and creating a stronger magnet. These Series of magnets are approximately 30% more powerful than the competing units of the same size and equivalent or superior to many sizes of Electros. As a result of this increase in strength and the potential for use in extreme applications Manganese Wear Impact Plates are included as standard.

Exclusive to the industry, our magnetic separators utilize tri-polar magnetic circuitry. This eliminates most peripheral magnetic leakage and directs the magnetic field straight down, improving and increasing the strength compared to equivalent sized magnets. This technology is not available from any other magnet system manufacturer in North America. Magnetic intensity in excess of 400-500 gauss at the recommended working gap retained permanently when used under normal operating conditions.

If buying American made products is important to you, always ask where competing items are made. The majority of our competitors' products originate in Canada or overseas, a fact not always clearly stated.

Get in Touch with Mechanic
Related Products
Recent Posts
  1. magnetic separation technique procedures

  2. gold separating machine mining equipment price kws

  3. spiral chute separator java

  4. spiral chute for zircon chrome ore separating

  5. magnetic separator machine for feldpar

  6. spiral chute mining equipment of gravity separation for mineral

  7. machines that separate gold

  8. high end sandstone magnetic separator sell in albania

  9. high telsa dry drum tymagnetic separator

  10. characterization and beneficiation of anka chromite ore using magnetic separation process

  11. environmental gypsum coal mill in leon

  12. shale rock crusher for sale

  13. wet ball mills xintao

  14. ore concentration machine europe

  15. portable ceramsite mineral processing production line in tshwane

  16. sapporo high quality portable glass spiral classifier sell

  17. tangible benefits small iron ore ore processing line manufacturer in leeds

  18. principe jaw crusher

  19. the united arab emirates tangible benefits bluestone high efficiency concentrator price

  20. manufacturers of mobile crushers